Carestream - Trophy - integration

Overview

This is for setting up the trophy integration to use RVG with Carestream Imaging software.

Detailed Instructions

This is the best adjustment for offices that have issues with Carestream’s SDK.

Setup > Site Configuration > Edit Control Table > Workstation Settings

• Under Digital Radiography, select Trophy/Kodak. Change the path to C:/TW or C:/program files/TW, depending on where the TW is located.
• C:\Program Files (x86)\Kodak\KODAK Dental Imaging Software -is an additional path that should be added as a possible path. 
• Then, when you select the tooth icon, it will open Carestream Imaging.
• You can use that software to acquire an image.
• Once you have your image in Carestream image, copy the image, then paste the image into the acquire window and save it in TDO normally.